All timber garages are clad using a quality 19mm x 150mm (nominal) pressure
treated redwood shiplap. We use 4" x 2" pressure treated framing and 6" x 2" pressure treated roof purlins. The
uprights are spaced at 600mm centres and lined with 140gsm reinforced Torstrand lining paper, while the roof purlins
are spaced at 600mm centres. A damp proof membrane is applied to the bottom of the soleplates.
The roof to our timber garages are constructed using black corrugated onduline sheeting, which
has a manufacturers maintenance free guarantee of 15 years. All garages have the added benefit of 12mm hardwood
ply lining underneath the onduline, along with clear roof sheets (quantity depends on size). All timber garages come with
guttering to the sides. We offer two eaves height options as standard either 7ft or 8ft,
(eaves being from ground level to the lowest part of the roof, excluding brickwork).
One pair of double doors to fit an 8ft entrance are supplied as standard with our timber garages. Additional doors can
be supplied at an extra cost. All doors are full framed, ledged & braced and lined with 9mm ply wood. All doors are supplied complete with heavy duty galvanised hinges, drop bolts & a brenton bolt.
